Behringer
Behringer Super-X Pro CX2310 Crossover
Description
The Behringer Super-X Pro CX2310 is a stereo 2-way/3-way crossover unit. It’s used in PA systems where you need to send different frequency ranges to specific speaker types, such as bass drivers and treble horns. Churches in Nairobi, small venues, and school sound systems often use this kind of processor to get the most out of their loudspeakers.
Specifications
- Brand: Behringer
- Model: CX2310
- Type: Power Amplifier
What a Power Amplifier needs around it
A crossover like this Behringer CX2310 is part of a larger sound system. It takes a full-range signal from a mixer and splits it into separate low-frequency and high-frequency signals. These signals then need to be amplified. This means you will need power amplifiers to boost the signals before they reach your speakers. You will also need the actual loudspeakers – usually a subwoofer for the low frequencies and a mid/high speaker for the rest. Good quality XLR cables are also essential for connecting the mixer to the crossover, and the crossover to the amplifiers.
First setup
To set up the CX2310, you would typically connect the main stereo outputs from your sound mixer into the inputs of the crossover. From the outputs of the CX2310, you would then run separate cables to the inputs of your power amplifiers. For example, in a 2-way stereo setup, you would use the "Low Output" to feed one amplifier driving your bass speakers, and the "High Output" to feed another amplifier driving your mid/high speakers. This processor can be configured for 2-way stereo or 3-way mono operation.